36
Moisture Analysis
Operating Instructions Moisture Analyzer MA37
+
4.000
g
Place pan and two filters, close
hood for taring
D
t
Place an empty sample pan on the analyzer, along with one or two filters if
necessary .
The number of filters depends on how many filters are set in the parameters for
the current method .
t
Close the hood .
y
The moisture analyzer tares automatically .
Open hood
0.000
g
D
t
Open the hood .
Fill in sample and close hood to
start
;
-
0.000
g
t
Place the sample on the sample pan or filter(s) .
Fill in sample
;
+
1.929
g
2.000
y
If you have activated the “Initial weight” option in the method parameters,
a target value display appears .
t
Add the sample to the sample pan slowly . When the sample quantity reaches
the preset range, the target value display turns green .
Close hood to start
;
+
1.929
g
2.000
t
Close the hood .
y
The moisture analysis starts automatically .
During the measurement, the process status light on the analyzer flashes,
if the light has not been switched off in the menu .
