50
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing (NUM print; S ID), you can also
access the following functions from this
application:
Calibration/Adjustment
G
Press the
Cal
soft key
> See “Calibration/Adjustment” for
further instructions
Toggling to the Next Application
G
Press
d
> See the section on the corresponding
application program for further
instructions
Setup (setting parameters)
G
Press
o
> See “Configuration” for further
instructions
Turning Off the Balance
G
Press
e
> The balance shuts off
Practical Example
Toggle the Display From Grams [g] (1st Unit) to Troy Ounces [ozt] (2nd Unit)
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Toggle wt. units: Weight unit 2: Troy ounces /ozt
Step
Key (or instruction)
Display/Output
1. Toggle back to weight unit 1,
c
if necessary (
(
: Weight unit 1)
2. Change weight unit
ozt
soft key
to Troy ounces [ozt]
(
)
: Weight unit 2)
3. Change weight unit
g
soft key
to Grams [g]
g
Max4200 g
0%
TOGGLE UNITS:
(
L
S
T
d= 0.01g
100%
182
1
48
F
S
a
s
Cal
ozt
ozt
Max 135
0%
TOGGLE UNITS:
)
L
S
T
d=----
100%
5
8
5620
F
S
a
s
Cal
g
