38
Operating the Combics
Data ID Codes (Identifiers)
This function is available in all
application programs and lets you
assign codes for identification of
measured values (such as product name,
batch number, etc.) for inclusion on
printouts.
Features
– Up to four ID codes can be stored,
edited and individually deleted
– Each ID code has a name and value.
Both are user-definable.
– The name is left-justified and the value
is right-justified on the printout.
If name and value together are too long
for one line, the remaining characters
are printed in subsequent lines.
– Enter ID code names in Setup under:
Device: Printout: ID
codes
Enter up to 20 characters for the
name of the ID code. No more than
11 characters are displayed during
input; all 20 characters are printed.
– Values for the ID codes are entered
when an application program is active;
toggle to the input mode by pressing
the
ID
soft key. You can enter up
to 21 characters for the value of the
ID code.
– Enter the first value directly through the
numeric keypad. Press the
1st ID
soft key to save the value.
– To delete individual characters from an
ID code value, press the
c
soft key;
press
Delete
to delete the entire
code.
– If both the name and value fields are
empty, no ID code is printed.
– In the Setup program, you can configure
when and whether ID codes are printed
(see “Configuring Printouts”).
Factory settings for the
ID code names:
ID1:
ID1
ID2:
ID2
ID3:
ID3
ID4:
ID4
Factory settings for the ID code values:
No default values set.
Soft Key Functions
ID
Toggle to ID code input
ESC
Cancel input
Delete
Delete selected ID code value
1st ID
Save the value entered as
the first ID code
Summary of Contents for CH3E
