48
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Web Interface - Display Settings
1.
Di
splay Format -
Allows the user to select how the time is displayed on the clock. There are two options: 12
hour format (3:00AM/3:00PM) or 24 hour format (3:00/15:00).
2.
Date Format -
Sets the date to display in either American style: MM:DD:YY or European style: DD:MM:YY. For 4
digit clocks, the date will display in either American style: MM:DD or European style: DD:MM.
3.
Brightness -
Sets the brightness level that the clock will display. There are four levels to choose from: High,
Medium, Low or Off.
4.
Brightness Schedule
- When the button is pressed, the user is taken to the Brightness Schedule Page. Refer to
the section of this manual labeled “Web Interface - Brightness Schedule” for further instructions.
5.
Seconds Time Displayed* -
The clock will display the time for the number of seconds entered in the box. After
the selected amount of time passes, the clock will change to show Date or Temperature. If a time of 0 is selected,
the clock will not display the time. If Date and Temp Displayed are set to 0, the clock will only display the time.
6.
Seconds Date Displayed* -
The clock will display the date for the number of seconds entered in the box. After
the selected amount of time passes, the clock will change to show the Time or Temperature. If a time of 0 is selected,
the clock will not display the date. If Time and Temp Displayed are set to 0, the clock will only display the date.
7.
Seconds Temp Displayed*
- If a temperature sensor was installed on the clock, the clock will display the
temperature for the number of seconds entered in the box. After the selected amount of time passes, the clock will
change to show the Time or Date. If a time of 0 is selected, the clock will not display the temperature. If Time and
Date Displayed are set to 0, the clock will only display the temperature.
8.
Display Temp In -
If a temperature sensor was installed on the clock, this option allows a user to select whether
the temperature appears in Fahrenheit or Celsius.
9.
Submit
- Applies any changes to the previous options when pressed.
10.
Cancel -
Reverses any recent changes to the Displ
ay Settings tab without applying any changes to the clock.
*Note:
If the Time, Date, and Temp Displayed are ALL set to 0, the display will turn completely blank. It will turn on
for count down/up, and off again once the counting has been cleared.
1
3
5
7
9
2
4
6
8
10
S y n c h r o n i z e d C l o c k S y s t e m s