1
3
2
17
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation
1) If you are installing a new gang box in the wall,
leave at least 4 inches between the top of the gang
box and ceiling. Confirm that the bottom of the
gang box is level with the floor.
If you are using an existing gang box, the top of the
gang box must be a minimum of three inches away
from the ceiling.
3) If you do not wish to attach the housing to the gang box, proceed to step 4A. Otherwise, go to step 5.
Ceiling
4” Minimum
2) Run a CAT5 or CAT6 data cable from a PoE
switch or PoE injector to the gang box. Confirm that
the switch or injector, and either an NTP server or
internet modem, are connected to your network
router. The clock-side of the cable should terminate
in a male RJ45 connector.
KNOW YOUR NETWORK
Make sure that your network firewall is set to
allow communication between the clocks and
NTP servers. This means that Ports 80, 123,
and 1777 must be open.
