The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
33
Sbdconfig Software - Elapsed Timer (3200/3300 Versions)
On the Elapsed Timer tab, there are four buttons available to program. Each option has different functionality to meet your needs.
1. Program the first button on the Elapsed Timer by selecting one of the options in the drop down list next to Button 1. Listed below are the
options and what their functions are:
•
No Action:
The timer button will not perform any function when this option is selected.
•
Return to Time Display:
This option will cause the digital clock to return to the current time display, regardless of what function it is
currently displaying.
•
Briefly Display Date:
This option will change the clock’s display to briefly show the date when the current time is on display. This
option will not work in count up or count down mode.
•
Go to Count Up and Hold:
This option will cause the digital clock to hold at zero and wait for the count up to start. Press the button
programmed for Start/Stop to begin Count Up.
•
Go to Count Up and Start:
This option will make the clock display the count up function and begin counting up from zero as soon as
the button is pushed.
•
Go to Count Down and Hold:
This option will cause the digital clock to hold at the specified count down start time and wait for the
function to start. Press the button programmed for Start/Stop to begin Count Down.
•
Go to Count Down and Start:
This option will make the clock display the count down function and begin counting down from a
specified time, as soon as the button is pushed.
•
Reset:
This option will cause the timer to rest the last-used Count Down or Count Up.
•
Start/Stop:
This option will cause the timer to start or stop its counting function.
•
Shift Digits:
This option will cause the digits to shift from an Hour/Minutes display to a Minutes/Seconds display
(4 digit digital clocks only).
•
Flash Time:
This option will enable the time to flash for 2 seconds when a count down is in progress.
•
Relay 1:
This option will cause the relay contact closure to close for a specified number of seconds (3300 Series Only).
•
Relay 2:
This option will cause the relay contact closure to close for a specified number of seconds (3300 Series Only).
•
Code Blue:
This option enables a special purpose Count Up. When the designated button is pressed the first time, a Count Up will
begin. When pressed again, the Count Up will pause. When pressed and held, the Count Up will clear and the display will go back to
showing the time. This overrides the interface lights, so that the interface is green while the time is running, and red when the timer has
been paused.
*Instructions continued on next page
Note:
The default option for the Elapsed Timer buttons is No Action.
Note:
It is recommended that a user program one of the buttons with the Start/Stop option.
Note:
If Relay 1 is used for an Output Sync, it cannot be used with the Elapsed Timer.
sb
dc
on
fig
.e
xe
so
ft
wa
re
