SY6600 Vector Control Inverter User Manual
28
Fig 4-2 Procedure of parameter setup
4.6 Parameter Display
In stopping state or running state, various state parameters can be displayed by
LED. The displayed parameters can be decided by PH.00 ~ PH.01 and can be scrolled
through by pressing the
SHIFT key. The following is an explanation for the parameters
operation method in stopping and running state.
4.6.1
Switch of Parameter Display in Stopping State
In stopping state, the drive has 9 state parameters which can be scrolled by
SHIFT
key, they are: frequency setting, external counting value, digital value input terminal
state, digital value output terminal state, panel potentiometer, analog input AI1, analog
input AI2 and DC bus voltage. Please refer to the explanation of PH.01.
The default value of PH.01 is "preset frequency". If PH.01 value is set to 2, default
display parameter in stopping state will be changed into "DC bus voltage".
User can look up other parameters during stopping state by pressing
SHIFT key: Every
time you press
SHIFT key, the next parameter in stopping state will be displayed.
