Sanyo VPC-AZ3 Instruction Manual Download Page 145

Page: 145 / 207

Clearing the print settings

Display the Print Setting Screen
(see page 135).

Select “ALL CLEAR”.

Press the SET button.

The All Clear Screen appears.

YES: To clear the print settings for all

images.

NO: To cancel the clear procedure

and return to the Print Setting
Screen.

Select “YES”, and press the SET
button.

All the print settings are cleared and
you are returned to the Print Setting
Screen.

To return to the Playback Setting
Screen, press the MENU button,
and press the SET button.

HINT

The current print settings for each image can be checked on the
Information Screen.

Images that have been rotated will be printed in their original orientation.

The quality of the print output will differ depending on the print service and
printer used.

PRINT SETTING

STANDARD

INDEX

ALL CLEAR

EXIT

º 5 DATE INDEX

ALL CLEAR

YES

Example: 5 standard prints with date

display and an index print

100-0001
1.1MB

º 5

INFO

SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002

English

142

Summary of Contents for VPC-AZ3
















































































































































































































Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands

Sanyo VPC-AZ3, Instruction Manual

Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands