NOTE
About sequential shots shooting
œ
In sequential shots shooting, the autofocus function is activated when the
shutter release button is pressed and remains fixed at the same focus until
the sequential shots are finished.
If the motion alert icon appears...
œ
During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera movement becomes high, the
motion alert icon
T
may appear on the LCD monitor. In this case, use a
tripod to stabilize the camera when shooting, set the exposure control (see
page 107) to
Ï
, or set the flash operation mode to automatic (see page
71).
œ
When the shutter release button is pressed halfway, the image in the LCD
monitor may waver vertically. This is the result of internal image processing
and is not a malfunction. This wavering is not recorded and will not affect
your images in any way.
NOTE
Did you snap a picture without a card installed?
œ
When you press the shutter release button, it may sound and feel as
though the camera is actually operating to capture the shot. However, this
function has been incorporated in the camera to enable you to experience
what the actual operation feels like while you try out the camera before
purchasing. Without a card installed in the camera, it is impossible to
capture images, so please be sure to install the card before operating your
camera.
12
8.0
1S
M
Motion alert icon
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
English
58
