Sanyo VPC-AZ3 Instruction Manual Download Page 162

Page: 162 / 207

SETTING THE DATE AND TIME

Set the date.

Press the arrow button to select
[DATE].

Press the SET button.

The Set Date Screen appears.

Press the arrow button to set the
date to “2003/1/23”.

Year setting

[

]

Month

setting

[

]

Day setting.

Press [

] to increase the number.

Press [

] to decrease the

number.

Press the SET button.

Set the clock.

Press the arrow button to select
[TIME].

Press the SET button.

The Set Time Screen appears.

Press the arrow button to set the
time to “19:30”.

Hour setting

[

]

Minute

setting.

A 24-hour clock is used for the
time display.

Press the SET button.

‡
º

2003/01/23

CLOCK SET

DATE

‡
º

19:30

CLOCK SET

TIME

SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002

159

English

Summary of Contents for VPC-AZ3
















































































































































































































Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands

Sanyo VPC-AZ3, Instruction Manual

Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands