Sanyo VPC-AZ3 Instruction Manual Download Page 63

Page: 63 / 207

CAPTURING STILL IMAGES

Set the camera to the still image
shooting mode (see page 59).

Take a picture.

Point the camera lens at the
subject. Slowly press and hold the
shutter release button halfway.

The area in the center of the LCD
monitor comes clearly into focus,
and the focus icon

appears in

the upper left corner (focus-lock).

If the Shooting Setting Screen
(see page 45) or Shooting
Information Screen (see page
124) was displayed, it is exited.

The focus icon does not appear if
the focus is set to telephoto

or manual

, or during quick

shot shooting (see page 121).

Press the shutter release button all
the way.

The image is captured.

NOTE

You can view the image captured on the LCD monitor by holding the
shutter release button down.

The stand-by indicator will flash red while the image is being written to the
memory. Another image can only be captured when the stand-by indicator
lights green again.

The camera is ready for capturing the next image after about 1 second.

(Press halfway)

3.1
1/50

(Press fully)

SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002

English

Summary of Contents for VPC-AZ3
















































































































































































































Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands

Sanyo VPC-AZ3, Instruction Manual

Search results

Summary of Contents for VPC-AZ3

Reviews:

Related manuals for VPC-AZ3

Brands by name

Popular brands