Sanyo VCC-XZN600P, Instruction Manual

Page: 50 / 153

Use the / button to select [ACTION], and use the / button to choose “ZOOM”.
Under the item [ACTION], [RATIO] and [ZOOM TIME] appear.
Use the / button to select [RATIO], and use the / button to choose the desired
magnification power used when the alarm is detected.
Available settings: WIDE (widest angle), 1/8, 1/5.6, 1/4, 1/2.8, 1/2, 1/1.4, x1.4, x2, x2.8, x4, x5.6, x8, TELE
(maximum telephoto), and MANU
Use the / button to select [ZOOM TIME], and use the / button to set the duration for
which the zoomed image is displayed.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M, 3M, 4M, 5M (S: seconds, M: minutes)
1
2
Use the / button to choose “MANU” and press the SET button.
The RATIO SETTING screen appears. On this screen, the and buttons are used for zooming
operation and the and buttons for focusing operation.
Use the / button to adjust the zoom and use the / button to adjust the focus and press
the SET button.
The settings made in step are saved and the ALARM IN screen appears again.
The / button can be used to adjust the focus even when the auto focus is set ([FOCUS] is set to
“AUTO”).
1
2
2
3
50 / 153