The schedule function works according to the time set on the camera (the time displayed in the main screen).
After you turn on/off the camera, configure the exact time on the [CLOCK SETTING] screen.
Specify the schedule for sending the notification e-mail using the timer and sending the alarm notification.
Enables/disables the schedule function for each day of the week.
Select the checkbox to enable the schedule function for the corresponding day of the week.
Specify the duration (the start and end time) for activating the function.
When the end time is earlier than or equal to the start time, the duration specified extends to the next day, and
the day of the week displayed for the end time changes to the next day.
The specified schedule can be applied to the following five functions.
TIMER (SMTP)
Enable/disables the e-mail transmission using the timer.
TIMER (FTP)
Enables/disables the image transmission using the timer in the FTP mode.
ALARM (SMTP)
If you want to enable the same schedule setting to be applied to every day, select “DAILY” at the
bottom of the column and specify the details.
131 / 153
Summary of Contents for VCC-XZN600P
Page 6: ...6 153 ...
Page 61: ...61 153 ...
Page 79: ...79 153 ...
Page 90: ...Weight Without sunshade Approx 1 8 kg With sunshade Approx 2 0 g 90 153 ...
