Enables/disables the schedule function and operation mode setting for each day of the week.
Select the checkbox to enable the schedule function for the corresponding day of the week.
Specifies the start time for performing the operation.
Select the operation mode from [COMMAND] and specify the registration number for the operation pattern.
Copies the setting of the selected row. Clicking the [COPY] button stores the setting in the memory buffer and
turns the button color to red.
Replaces the row where the [PASTE] button is clicked with the setting copied using the [COPY] button.
Specifies the dates you want to treat as holidays.
If you want to enable the same schedule setting to be applied to every day, select “DAILY” at the
bottom of the column and specify the details.
COMMAND
Registration number
PRESET
1 – 8
AUX ON
1 - 16
AUX OFF
1 - 16
When both the day of the week checkbox (SUN - SAT) and the [DAILY] checkbox are selected, the
earlier start time setting precedes. If the start time settings are same for both checkboxes, the day of
the week setting takes precedence.
If the [START] time settings on the left and right are same and the settings selected for [COMMAND]
on the left and right are different, the setting selected for [COMMAND] on the left takes precedence.
If the start time setting is changed after the auto-mode operation has started, the specified operation
will run according to the updated schedule.
133 / 153
Summary of Contents for VCC-XZN600P
Page 6: ...6 153 ...
Page 61: ...61 153 ...
Page 79: ...79 153 ...
Page 90: ...Weight Without sunshade Approx 1 8 kg With sunshade Approx 2 0 g 90 153 ...
