Sanyo VA-80LAN, Instruction Manual

Page: 22 / 34

English 21
SCHEDULE SETTINGS
(“admin” only)
The schedule function works according to the time set on the option board (the time displayed in the
main screen). After you turn on/off the camera, configure the exact time on the CLOCK SETTING
screen.
■
SCHEDULE
Specify the schedule for sending the notification e-mail using the timer and sending the alarm
notification.
1
Day of the week (WEEK)
Enables/disables the schedule function for each day
of the week.
Select the checkbox to enable the schedule function
for the corresponding day of the week.
MEMO:
If you want to enable the same schedule setting to
be applied to every day, select “DAILY” at the bottom
of the column and specify the details.
2
Setting schedule function (START/END)
Specify the duration (the start and end time) for
activating the function.
When the end time is earlier than or equal to the
start time, the duration specified extends to the next
day, and the day of the week displayed for the end
time changes to the next day.
3 Specifying the function to be performed
The specified schedule can be applied to the
following five functions.
• TIMER (SMTP)
Enable/disables the e-mail transmission using
the timer.
• TIMER (FTP)
Enables/disables the image transmission using
the timer in the FTP mode.
• ALARM (SMTP)
Enables/disables transmission of the alarm
notification e-mail.
• ALARM (FTP)
Enables/disables alarm image transmission in
the FTP mode.
• REMOTE ALARM “ACTIVE”
Enables/disables Alarm Output 2 remotely.
For each function above, select “ON” or “OFF”.
4
[COPY] button
Copies the setting of the selected row. Clicking the
[COPY] button stores the setting in the memory
buffer and turns the button color to red.
5
[PASTE] button
Replaces the row where the [PASTE] button is
clicked with the setting copied using the [COPY]
button.
MEMO:
• If the schedules overlap, the operation that
requires longer time takes precedence.
In the case shown in the figure below, the
function works continuously from the earlier
start time (START1) to the later end time
(END2).
• If the scheduled duration is changed after the
function is activated, the function will follow
the updated schedule.
4 5 3 2 1
OFF Disables the function.
ON
Performs the function according to the
schedule.
START1 START2 END1 END2
The duration for the function to
be activated