English
9
Using The Main Screen
■
How To Use the Control Panel
Operations in the control panel are limited to an administrative user (admin).
Control Panel
1
5
2
3
4
6
8
9
7
1
Camera control buttons
2
ZOOM
The slide bar is used to select the desired zoom magnification.
In addition, clicking the
(WIDE)/
(TELE) button allows
you to select desired zoom magnification. Pressing and holding
the
(WIDE)/
(TELE) button consecutively changes the
zoom magnification.
MEMO:
When the electronic zoom function (EL ZOOM) is enabled on the
camera and the zoom magnification reaches the maximum value
of optical zoom (x30), clicking the
button further activates
the electronic zoom function.
3
RESOLUTION
Specifies the video resolution at seven levels.
MEMO:
The DFFC (Dynamic Field/Frame Conversion) function detects
movements in the object according to changes in brightness and
automatically switches from frame to field mode. When the field
mode is switched to, vertical resolution deteriorates to some
degree, however, there is less jaggedness of moving object's
edge.
(If the change in brightness is too small, DFFC may not
function.)
Changes the camera orientation toward the
direction indicated by arrow mark.
(The camera control buttons cannot be
operated while the camera configuration
menu is displayed.)
• Clicking the video image changes the
camera’s orientation so that the point
where you click is located at the
center of the image.
Scans the monitored area end to end
vertically or horizontally for respective
buttons, and stops at the current camera
position.
Starts the sequence, auto-panning, or tour
action, respectively.
Performs the one-push auto focus function.
Displays the on-screen camera configuration
menu.
Displays the next screen of the configuration
menu or executes the command.
