70
do not use a body-worn accessory, ensure the antenna is at least
0.866
inch ([
2.2
] centimeters)
from your body when transmitting. Use of non-PSC approved accessories may violate FCC RF
exposure guidelines.
For more information about RF exposure, visit the FCC Web site at www.fcc.gov.
Specific Absorption Rate (SAR) for Wireless
Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head
of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and calculation
process. It does not represent how much RF the phone emits. All phone models are tested at
their highest value in strict laboratory settings. But when in operation, the SAR of a phone can
be substantially less than the level reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design and other factors. What is
important to remember is that each phone meets strict federal guidelines. Variations in SARs do
not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial margin of safety.
As stated above, variations in SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard of 1.6 W/kg are considered
safe for use by the public.
The highest reported SAR values of the SCP-2700 are:
Cellular CDMA mode (Part 22):
Head:
[
1.25
]
W/kg; Body-worn:
[
0.647
]
W/kg
PCS mode (Part 24):
Head:
[
1.16
]
W/kg; Body-worn:
[
0.524
]
W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number: V65SCP-27H.
More information on the phone’s SAR can be found from the following FCC Website:
http://www.fcc.gov/oet/fccid.
Summary of Contents for SCP-2700
Page 1: ...SCP2700 Operating Guide Draft ...
Page 8: ...7 Phone Basics Your Phone ...
