Sanyo SANUPS A11J, Instruction Manual

Page: 32 / 52

Operating Procedures
29
§
8
8
.
.
2
2
U
U
P
P
S
S
S
S
h
h
u
u
t
t
d
d
o
o
w
w
n
n
Follow the procedure below to shut down the UPS.
Be sure to shut down the load devices prior to shutting down the UPS.
If the UPS will not be used for one week or more, proceed to step
⑤
.
The LCD panel and
all LEDs turn off.
When shutting down the UPS daily,
do not touch
MAIN MCCB
. Leave it
set to “ON.”
Note
②
Press .
[Select]=INV OFF
[Back]=Cancel
- STANDBY
****
The screen changes
after approx. 1 sec.
INV OFF
Control OK
3 2
③
Press .
STATUS
①
Press any key on the LCD panel to display the screen.
Green: Off
Green: Lit
Green: Off
Red: Off
Green: Lit Green: Off Red: Off
④
Check that the LCD display and LEDs are in the states shown in the diagram below.
- STANDBY
****
⑤
Set this to “OFF.”
⑤
Set
MAIN MCCB
to “OFF.”
If
MAIN MCCB
is set to “OFF” while the UPS is operating, the batteries are discharged as if a
power outage occurred. Be aware that when the input supply is restored, the full capacity of the
backup function will not be available until the batteries have had time to recharge.
Recharge the UPS periodically when you store the UPS for a long period after shutting down
the UPS using the procedure above. For details on charging, see
④
of §3.3 “Usage
Precautions.”
Notes