SanRex CALPOTE UG Series, Instruction Manual

Page: 93 / 97

93
Code Function name Setting range
Incre
ment
Unit
Default
value
Changeable
during
operation
F601
Er.01: Overcurrent
detection
– – 1 ✗
F602
Er.02:
Temperature rise
error
– – 1 ✗
F603 Er.03: Fuse blowout – – 1 ✗
F604
Er.04: Self-diagnosis
Load short circuit
error
0: No output – – 1 ✗
F605
Er.05: Self-diagnosis
Thyristor open
1: Output to 1A-1C – – 1 ✗
F606
Er.06: Self-diagnosis
Thyristor short circuit
2: Output to HA-HC – – 1 ✗
F607 Er.07: CPU error 3: Output to both – – 0 ✗
F608 Er.08: Memory error – – 0 ✗
F609 Er.09: Emergency stop – – 0 ✗
F610
Er.10: Power supply
voltage drop
– – 2 ✗
F611
Er.11: Instantaneous
voltage drop
– – 2 ✗
F612 Er.12: Frequency error – – 2 ✗
F613
Er.13: Heater
disconnection
– – 2 ✗
F614
Er.14: Self-
diagnosis
Load open error
– – 2 ✗
F700 Self-diagnosis stop
0: Suspend self-diagnosis
1: Enable self-diagnosis
– – 1 ✗
F701 RUN/STOP key lock
0: Unlock
1: Lock
– – 0 ✗
F702 SAVE key lock
0: Unlock
1: Lock
– – 0 ✗
↑
(During operation refers to the state in which the operation status LED on the display panel is ON
or flashes, it does not indicate that output is generated.)