SanRex CALPOTE UG Series, Instruction Manual

Page: 37 / 97

37

d: Delay time
This parameter adjusts the delay function time. The delay function is used for multiple units
operated with the continuous cycle control method. The units can start in sequence after
the delay time specified for each unit even when the start/stop switching signal turns ON
simultaneously. This ON time lag reduces the amount of power supply usage during normal
operation.
※ This function can be enabled only for operation with the continuous cycle control
method.
 t: Period
This parameter adjusts the interval of the continuous cycle control method shown in the
following figure.
Interval t
 n: Function characteristics
This parameter is used to select the characteristic number of the function characteristic
function. The default relationship between the control signal and output level has a linear
characteristic. The characteristic can be switched using this parameter.
0.0%
10.0%
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
0.0% 20.0% 40.0% 60.0% 80.0% 100.0%
Ou
tpu
t
v
olta
g
e
Setting
No.0(linearity)
No.1(1.6th root characteristic)
No.2(1.8th root characteristic)
No.3(2.0th root characteristic)
No.4(2.2th root characteristic)
No.5(2.5th root characteristic)
No.6(3.0th root characteristic)
No.7(average characteristic)