Sankosha DF-100E-V3, Instruction Manual

Page: 23 / 62

23
2. Upper Body Cover setting
①
Put Upper Body Cover on the body so that the Steam
Cover is in the front position.
②
Pass the string which is attached inside of the
Steam Cover through the hole of body from
outside and tie it in the body.
3. Mat and cover setting of front and rear clamp / left and right side clamp
①
Set mats on front, rear clamp cover and set them on front, rear clamp plate and tie strings so that
there is no wrinkle.
②
Set mats on left, right side clamp cover and set them on left, right side clamp plate and tie strings
so that there is no wrinkle.
Upper Body Cover
String
Steam Cover
Pass strings from arrow direction and tie them inside.
Cover
Mat
Front Clamp
Side Clamp
（
Right and left
）
Rear Clamp
（
Center Vents Clamp
Side Vents Clamp
）
Side Vents Clamp
Receiver