Sankosha DF-100E-V3, Instruction Manual

Page: 14 / 62

14
Control Panel
①
Steam Timer Button (The light turns green when the button is ON.)
When this button is turned on, you can change the steam injection time with the ⑧ ”Dial”.
②
Blower Timer Button (The light turns green when the button is ON.)
When this button is turned on, you can change the blower time with the
⑧
”Dial”.
③ Landry Button (The light turns green when the button is ON.)
You can select time unit between minute and second for the blower timer.
When button is turned on, minute unit is selected and turned off, second unit is selected.
④ Test Button (The light turns green when the button is ON.)
Push this button to start the test operation for each function.
Please see page 24 "Test Operation" for further details.
⑤ Counter Clear Button
Push this button. "0" will blink at
⑨ "Display Window". Push ⑥ the "Enter Button".
You can reset the counter at "0". Push this button again. The window will show the garment
counter.
⑥
Enter Button (for Timer Remember) (The light turns green when the button is ON.)
Push this button after changing the timer setting for each mode. The time setting for each mode can
be saved.
⑦
Power Lamp
The red lamp is blinking if it is turned on. Also, it is blinking with Emergency Stop Button. It will
flash and go back to its original position with pushing the reset button.
⑧ Dial
This Dial can change all timers and select menu numbers.
⑨
Display Window
It shows the counter, timer with count down, error number menu number and etc…
①
④
②
⑤
③
⑥
⑦
⑧
⑨