manualshive.com logo in svg

Sankosha DF-100E-V3, Instruction Manual

The Sankosha DF-100E-V3 is a reliable and efficient garment steamer, perfect for both home and commercial use. Its advanced features and user-friendly interface make it a must-have appliance. To ensure proper usage, download the free instruction manual from manualshive.com to unleash the full potential of this amazing product.

Share
Download
background image

10 

 

 

Safety Labels on the Machine 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

①

 

 

 

②

 

 

③

 

 

 

 

 

   

④

 

 

It may cause electric shock. 
Before opening Control Box or maintenance, always turn the power off.

 

⑤

 

 

High pressure air! 
Before maintenance, close air valve and drain residual pressure.

 

⑥

 

 

Surface is HOT! 
Do not touch press head, piping and its surrounding area.

 

⑦

 

 

High pressure steam! 
Before maintenance, close steam valve and drain residual pressure.

 

⑧

 

 

Cut hazard! 
Keep hands away from the machine.    Do not touch while operating.

 

⑨

 

 

Pinch hazard! 
Keep hands away from the machine.    Turn the power off during maintenance or cleaning.

 

⑩

 

 

Pinch hazard! 
Keep hands away from the machine.    Do not touch while operating. 

⑪

 

 

Clean filter before operation.

 

 

⑫

 

 

Center Mark 

Indicating the center of gravity of 

the machine.

 

⑤ 

⑥ 

⑤ 

② 

④

（

Inside 

 

Control Box

）

 

⑨ 

 

 

① 

 

 

 

 

 

 

⑫ 

⑦ 

③ 

⑫ 

① 

⑧ 

⑪ 

⑩ 

④ 

 

 

 

 

Make sure that each warning label is placed at 

the location shown above.    If any of the labels 
is missing, damaged, or illegible, contact your 
distributor to obtain a new one.

 

Summary of Contents for DF-100E-V3































































Reviews:

No comments

Related manuals for DF-100E-V3

Brands by name

Popular brands

Load more brands