6
These tanks have several inlets of different diameters for the inlet of the effluents, or drilling zones (refer to the
dimensions on pages 10-11).
These devices comply with the EN 12050-1 standard (pumping station for waste water containing faeces) as well
as the European directives on construction products, electrical safety and electromagnetic compatibility.
DoP available on our website in the product file ("Diagrams and technical data sheet" tab).
They must be installed in accordance with standards EN 12056-4 for indoor installation and EN 752 for outdoor
installation.
3.2 Scope of supply
SANIFOS
®
110 P
On a pallet:
• SANIFOS tank
®
110 litres
• Hydraulic to be assembled
• SANIPUMP
®
submersible pump with float switch (float cable H07RN-F 2 x 1 mm² + earth), mounting base and
H07RN-F-3G type 1.5 mm² pump supply cable of 10 meters in length (in a separate package)
• In an accessory bag: 1 cable gland, cover and gasket
Note :
- The shut-off valves and the non-return valve are not supplied.
- SANIFOS
®
110 P is provided with a cover supporting up to 200kg.
SANIFOS
®
280
On a pallet:
• SANIFOS
®
tank 280 litres with cover and sealing ring
• Hydraulic pre-assembled in the tank including 1 shut-off valve and 1 non-return valve
• SANIPUMP
®
submersible pump with float switch (float cable H07RN-F 2 x 1 mm² + earth), mounting base and
H07RN-F-3G type 1.5 mm² pump supply cable of 10 meters in length (in a separate package), 1 chain (model
with extension)
• In an accessory bag: 1 vent socket 75 mm, 2 hose clamps, 2 pipe seals (DN 50 and DN 100).
A 30 cm height extension is available for the SANIFOS
®
280 (see
page 10).
SANIFOS
®
610
On a pallet:
• SANIFOS
®
610 litre tank with cover and sealing ring
• Hydraulic pre-assembled in the tank including
- single-pump model : 1 shut-off valve, 1 non-return valve
- 2-pump model : 2 shut-off valves, 2 non-return valves and 3 floats directly installed in the tank (float cable 07RN-F
2 x 1 mm²)
• 1 or 2 submersible SANIPUMP
®
pump(s) with mounting base (in 2 separate packs)
• SMART remote control box with power cable type H07RN-F-3G1.5 mm² (2.5 m length), power cables for
pumps type H07RN-F-4G1.5 mm² (4 meters long), float connection cables (4 meters) and quick connectors. For
the three-phase version, power cables type H07RN-F-5G 2.5 mm² (2.5 m long), power cables for pumps type
H07RN-F-4G1.5 mm² (4 meters in length).
• HF remote alarm unit
• Accessory bag with: 1 chain and 2 or 3 stainless steel snap hooks, 5 cable glands (2 x PG13 and 3 x PG11),
2 x IP 68 waterproof terminal blocks: 4 conductors for pumps, 3 terminal blocks IP 68: 2 conductors for floats,
2 pipe seals (DN 50 and DN100), 1 vent socket 75mm, 2 hose clamps, cable clips, screws.
SANIFOS
®
1300
On 2 pallets:
• SANIFOS
®
1300 litre tank with cover and gasket
• Hydraulic pre-assembled in the tank including stainless steel guide bars, 2 shut-off valves, 2 non-return valves
and 3 floats directly installed in the tank (float cable 07RN-F 2 x 1 mm²)
• 2 submersible SANIPUMP
®
pumps
• SMART remote control box with power cable type H07RN-F-3G1.5 mm² (2.5 m length), power cables for
pumps type H07RN-F-4G1.5 mm² (4 meters long), float connection cables (4 meters) and quick connectors. For
