27
Single-phase
version
:
Three-phase
version
:
Dry contact NO
Dry contact NC
External alarm
Dry contact NO
Dry contact NC
Max AC 250 V/16 A
DC 300 V/17 A
6.8 Remote wireless alarm box (included with SANIFOS
®
610 and SANIFOS
®
1300)
The alarm box must be installed indoors, in a damp-free location and close to an electrical
outlet.
Technical characteristics of the alarm device
HF alarm unit 868 MHz (radio)
Audio and visual information
Protection index: IP20
7. ACTIVATION
7.1 Prerequisites for commissioning
Before commissioning the pumping station, make sure that the electrical connection for the pumping station and all
protective devices has been correctly performed.
The pump and all protective devices are connected correctly.
• The safety instructions have been followed.
• The operating characteristics have been checked.
• The regulations in force at the place of installation are complied with.
7.2 Application limit
• Avoid running the pump with the valve closed.
• Observe the type of fluids permitted (see section 3.5).
• Dry running, without pumped fluid, must be avoided.
When in use, observe the parameters and values indicated in the table below.
Red LED:
General alarm
Green LED:
Mains alarm
Yellow LED:
HF transmission alarm
