Saniflo SANIFOS 110 P, Operating & Installation Manual

Page: 7 / 36

5
• Never hang up the pump by the electric cable.
• Use a suitable means of transport.
• The pumping station has been inspected to make sure there is no damage due to transport.
• Choose suitable means of transport according to the weight table.
Weight of the pumping station
Weight Weight
SANIFOS
®
110 P SANIFOS
®
280
110 litre tank 10 kg 280 litre tank with hydraulics to be assembled 25 kg
SANIPUMP
®
with 10 metres of cable and float 13 kg SANIPUMP
®
with 10 metres of cable and float 13 kg
Complete station 24 kg Complete station 48 kg
Product on pallet 41 kg Product on pallet 57 kg
SANIFOS
®
610 (1/2 pumps) SANIFOS
®
1300
610 litre tank with pre-assembled hydraulics
and floats
55/67kg
1300 litre tank with pre-assembled hydraulics and
floats
116 kg
SANIPUMP
®
x1/x2 13/26 kg SANIPUMP
®
x 2 38 kg
SMART Alarm box 4.5 kg SMART Alarm box 4.5 kg
Remote alarm box 0.5 kg Remote alarm box 0.5 kg
Complete station 68/88 kg Tank on pallet 138 kg
Product on pallet 102/125 kg Motors on pallet 54 kg
2.3 Temporary storage / Packaging
In the case of commissioning after an extended storage period, take the following precautions for the installation
of the pumping station.
Damp, dirty or damaged holes and points.
Leakage or damage to the pumping station!
➜
Clear the pumping station's blocked openings at the time of the installation.
2.4 Returns
• Properly drain the pumping station.
• Rinse and decontaminate the pumping station, especially if it has transported harmful, explosive, hot or otherwise
dangerous liquids.
2.5 Disposal at the end of life
At the end of its life, this product must be returned to a dedicated collection point.
• It cannot be treated as household waste.
• Ask your local council about where to take the old appliance so that it can be recycled or destroyed.
3. DESCRIPTION
3.1 General description
SANIFOS
®
110 P, SANIFOS
®
280, SANIFOS
®
610 and SANIFOS
®
1300 are wastewater pumping stations
specially developed for private, commercial and small-scale use (small buildings, shops,
public places). They are not intended for rainwater pumping.
They can be installed, placed inside the house or buried outside.
The tanks of the stations are made from high density polyethylene and have a high mechanical
resistance, are odour-resistant, UV-resistant and resistant to chemical attack. Their lid is
screwed and held in place by a safety screw (not provided).
The tanks of the stations are delivered with 1 or 2 pumps depending on the model. These
pumps are available with an SFA maceration system that allows the discharge of wastewater
in DN 40 (outer diameter 50) or with a vortex system for the discharge of wastewater in
DN 50 (outer diameter 63).