Sangean WFR-28BT User Manual Download Page 16

16

GB

 [Backlight]:

 Select this option and then select 

[Timeout]

 to configure the time after which the 

backlight turns off, or select 

[On

 

level]

 to adjust the 

display's brightness level when the radio is turned on.

 [Equaliser]:

 Select this option to choose one of 

the radio's equalizer modes (Flat, Rock, Pop, Jazz, 

Classic, News, Movie, or My EQ) or select the option 

[My EQ profile setup]

 to configure the bass and 

treble level and enable / disable the loudness feature 

for the My EQ equalizer mode.

 [Network]:

 Select this option to run the network 

wizard, run PBC setup, configure the radio's network 

connection, view and select available network 

profiles, or view or clear the network settings.

 [Time / Date]:

 Select this option to set the time and 

date manually, to set the source for automatically 

updating the time and date, or to and set the time 

format.

 [Inactive

 

Standby]:

 Select this option to configure 

the time after which the radio automatically switches 

to the Standby mode when not being used.

 [Language]:

 Select this option to configure the 

language in which the radio's menus are shown.

 [Factory

 

reset]:

 Select this option to reset the radio 

to the default factory settings. After confirmation, all 

user settings and preset stations will be erased. 

 [Software

 

update]:

 Select this option to configure 

whether the radio should occasionally check for 

available software updates or to check for available 

software updates.

 [Setup

 

wizard]:

 Select this option to perform the 

Setup wizard again, either right away or at the next 

startup. Refer to chapter 3 "Getting started" for more 

information on using the Setup wizard.

 [Info]:

 Select this option to view the radio's Spotify 

version, Radio ID and Friendly Name.

Manually setting the time and date

Setting the radio's time and date works slightly different 

from configuring most of the other radio's options and 

features. If you would be unable to automatically update 

the time and date using the DAB, FM or network, follow 

these steps to manually set the time and date:

1. 

Open the System settings menu using the three steps 

previously described.

2. 

Select 

[Time / Date]

 and

Time/Date

Set Time/Date

Auto update

Set format

>

 

press the Tuning knob.

 

The Time / Date submenu 

offers the following options:

 [Set Time / Date]:

 Select 

this option to manually 

configure the time and 

date.

 [Auto

 

update]:

 Select this option to select a source 

for automatically updating the time and date.

 [Set

 

format]:

 Select this option to select the 12 or 

24 hour format.

 

If the 

[Update from Network]

 is selected under 

[Auto

 

update]

, the Time / Date submenu will also show the 

following two options:

 [Set

 

timezone]:

 Select this option to configure the 

timezone.

 [Daylight

 

savings]:

 Select this option to enable or 

disable Daylight Savings Time (DST).

3. 

Select 

[Set Time / Date]

 and press Tuning knob to 

manually set the radio's time and date.

4. 

The radio's display will show the time and date and 

the day digits are blinking on the display.

5. 

Rotate the Tuning knob to select the current day and 

press the Tuning knob to confirm.

6. 

Next, the month digits will blink on the display.

7. 

Rotate the Tuning knob to select the current month 

and press the Tuning knob to confirm.

8. 

Next, the year digits will blink on the display.

9. 

Rotate the Tuning knob to select the current year and 

press the Tuning knob to confirm.

10. 

Next, the hour digits will blink on the display.

11. 

Rotate the Tuning knob to select the current hour and 

press the Tuning knob to confirm.

12. 

Next, the minute digits will blink on the display.

13. 

Rotate the Tuning knob to select the current minutes 

and press the Tuning knob to confirm.

14. 

Manually setting the time is now completed and the 

radio will return to the Time / Date submenu.

13. Using the Main menu

The Main menu can be used to select the radio's mode 

or to set the alarms and sleep timer of the radio. Follow 

these steps to access the Main menu:

1. 

Turn on the radio using the Power button.

2. 

Press the Menu button to open the menu for the current 

mode.

3. 

Rotate the Tuning knob to

Main menu

Internet radio

Podcasts

Spotify

DAB

FM

 

select 

[Main

 

menu]

 and 

press the Tuning knob to 

open the menu.
The Main menu offers the 

following options:

 [Internet

 

radio]:

 Select this option to switch to the 

Internet radio mode.

 [Podcasts]:

 Select this option to switch to the 

Podcast mode.

 [Spotify]:

 Select this option to switch to the Spotify 

mode.

 [DAB]:

 Select this option to switch to the DAB radio 

mode.

 [FM]:

 Select this option to switch to the FM radio 

mode.

 [Bluetooth]:

 Select this option to switch to the 

Bluetooth mode.

Summary of Contents for WFR-28BT



















Reviews: