17
GB
3.
Both alarms and their settings
Alarm 1
Enable: Off
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 24
will be shown on the display.
Select the alarm that you
want to set.
The submenu for configuring
an alarm offers the following
options:
●
[Enable]:
Select this option to configure the alarm
frequency, the available settings here are
[Off]
,
[Daily]
,
[Once]
,
[Weekends]
and
[Weekdays]
.
●
[Time]:
Select this option to set the alarm time. This
can be done in the same way as setting the time and
date in the previous chapter.
●
[Mode]:
Select this option to set the mode that is
used for the alarm.
●
[Preset]:
Select this option to select a preset or the
last listened station as the alarm source.
●
[Volume]:
Select this option to set the alarm volume.
●
[Save]:
Select this option to save the alarm settings.
4.
Set all the first five of the above options using the V /
,
/ Ʌ and SELECT /
buttons.
5.
Select
[Save]
and press the SELECT / button.
6.
To configure the other alarm, select the other alarm in
step 2 and repeat steps 3 and 4.
Notes:
●
When an alarm sounds, press the Power button to
turn off the alarm and switch the radio back to the
standby mode. Repeatedly press any of the other
buttons on the radio (except for the and
- buttons) to snooze the alarm for the number of
minutes displayed on the radio's display.
●
Alarms will stop sounding after 60 minutes have
elapsed since the start of the alarm.
●
Alarms can be quickly enabled and disabled by
repeatedly pressing the ALARM button in the
standby mode.
Setting the sleep timer
The sleep timer allows you to automatically turn off the
radio after a preset time has elapsed. It can be set from
15 to 120 minutes using by pressing and holding the
Power / Sleep button on the radio and then using the V /
or
/ Ʌ button to select the desired sleep time or
by using the
[Sleep]
option from the Main menu.
Follow the steps below to set the sleep timer using the
radio's Main menu:
1.
Open the Main menu using the three steps previously
described.
2.
Select
[Sleep]
and press the SELECT / button.
3.
Press the V /
or
/ Ʌ button to select the desired
sleep time.
4.
After the sleep time has elapsed, the radio will
automatically switch to the standby mode. An active
sleep timer is shown using a small sleep timer icon
at the bottom of the playback displays. This icon also
shows the sleep time remaining before the radio
switches to the standby mode.
5.
To cancel the sleep time before the preset time has
elapsed and to turn off the radio, press the Power
button to turn the unit off manually. To cancel the sleep
timer and leave the radio playing, go back into the sleep
timer settings (steps 1 to 3 above) and select the "Sleep
OFF" option in step 3.
Summary of Contents for DDR-66BT
Page 1: ...GB Version 1 DDR 66BT...