29
6.1.3.ACTIVATING BOOST
6.1.3.1.
Definition
The Boost function automatically sets the production setpoints to maximum for a cumulative
period of 24 hours of filtration time (accounting for filtration stoppages).
6.1.3.2.
Activation/deactivation
Press the
button to activate the Boost
function. The active polarity LED will flash.
or
Press the
button again to deactivate the
function.
Notes :
• Once Boost has finished, the setpoint returns to the value configured before Boost was
activated.
• The Boost time cannot be adjusted.
Observations:
• If the cover/shutter function is used while a Boost is in progress, Boost will be deactivated.
• The Boost function can only be activated when the cover/shutter function is off.
NEVER MANUALLY COVER THE POOL WHILE BOOST IS IN PROGRESS
• The Boost function will only activate when the production setpoint is not equal to zero.
6.1.4.REVERSE POLARITY
Your salt water chlorinator comes with a self-cleaning function for the cell. This involves your salt
water chlorinator periodically changing the polarity of your cell.
In some situations, you may need to alter the reversal time or force the reversal.
6.1.4.1.
Forced reversal
This function enables you to perform
one reversal.
Press the
and
buttons to trigger the reversal
cycle. The green and yellow LEDs will alternately glow
during the cycle. At the end of the cycle, they will
stop on green if the start colour was yellow, and vice
versa.
ou
