27
5.COMMISSIONING
CHECK THAT THE VALVES, SPECIFICALLY THE BY-PASS VALVE OF YOUR CELL
(IF THAT SET-UP IS USED), ARE OPEN.
•
Check that your salt level is correct:
4.5 kg/m³
Section 4.4
•
Check your pool’s pH:
6.8 < pH < 7.2
• Set your filtration time
Section 4.5
• Turn on the on/off button on your SALTLINE.
• Reconfigure the settings on your salt water chlorinator if required when installing or removing
the flow sensor
Section 6.1.5.4.
• Adjust your production level
Section 6.1.2
Note: If you have refilled the pool or added a significant quantity of water, shock your water (using the
‘chlorine shock’ and/or switch to ‘Boost’ function on your salt water chlorinator. (See section 6.1.3).
6.OPERATION
6.1.CONTROL PANEL
On/off - salt water
chlorinator
Control panel - salt
water chlorinator
Figure 6
Display
LED alarm
Production LEDs
Polarity LEDs
Figure 7
