S&P UTBS PRO-REG Series, Manual

Page: 9 / 72

9
,
. HANDLING
• When unit received, unpack and make sure the packaging is intact; any defect may indi-
cate damage to the equipment. Review it carefully to make sure that no parts are mis-
sing.
• If there is any damage to the unit or the shipment is not complete, write down the pro-
blems on the delivery slip and send a claim to the carrier. Also report any problems to
S&P.
Filtering section
The fi ltering section has one fl at fi lters made from galvanised steel frame.
This section includes an specifi c rail to fi t a second fi lter (supplied as an accessory).
Prefi lters
Mounting system via rails included.
Available prefi lters (accessories): G4/M5.
Final fi ltration
Mounting system via fast-clamps that allow a perfect thightness with the unit frame.
Standard fi lter (supplied with the unit): F7.
Available fi lters F6, F8 or F9 fi lters with an effi ciency level above 60%.
The fi lters have been manufactured according to UNE 779:2013.
• Components should be transported using appropriate hoist and slings. The equipment
has corner lugs for loading and unloading.
• The UTBS PRO-REG units are delivered bolted in pallets.