52
UTBS 1.0
UTBS 1.0
UTBS 1.0
UTBS 1.0
Isolate the electrical power supply again. Re-connect all of the other cables to the Corrigo
controller and fi nally re-energise UTBS PRO-REG and the reset procedure is now complete.
The run mode of the system (I.e VAV/CAV/COP) should now be re-set-up, together with
ensuring that the additional parameters (K-Constant, heater type etc.) are correct.
CONTROLLER RECONFIGURATION
¡IMPORTANT!
After reset the controller, it is necessary to reconfi gure the unit, as the factory set-
tings are deleted.
Summary of Contents for UTBS PRO-REG Series
