S&P UTBS PRO-REG Series, Manual

Page: 33 / 72

33
Operating mode selection
In units with electrical, if the operation mode is changed while the fans are running, the
unit will stop sequentially; fi rst switching off the electrical heater, and after 2 minutes
switching off the fans, then fi nally the unit will re-stard with the right working mode.
11.2.2. Installer level
In this level is possible to adjust the operating parameters of the unit: Fan, heating,
display, errors, etc..
Alarm display
Screen display settings
Adjust the brightness and display feedback.
Access settings
Remember that the equipment is supplied confi gured and tested in factory. Only will
be necessary to change the settings if you have reset the controller or if it has been
replaced by another.
By accessing settings can be selected:
• Working mode of the fans.
• Settings used fan.