S&P SLIM Series, Manual, Page: 60 / 72

60
ATTENTION
Within the electrical preheater, an isolation cover made from rubber seal is delivered. Once the preheater is placed
inside the unit , use moisture-resistant glue to attach the isolation cover to the preheater panel. It is recommended
to carry out with this attachment after making the electrical connection and double checking that the electrical pre-
heater works properly.
f) Connection of the fast-connectors
Before connecting...
Put the condensate tray back in the original position (step “c” of this procedure) and remove the filter through the bottom
(see section "10.1. Removing the fi lter through the bottom").
Taking a view across the filtering section, it is possible to see the fast connectors of the SLIM unit.
0HQX
6HUYLFH
6HWWLQJV
6HUYLFH
&23 &$9 9$9
9HQWLODWLRQPRGH
6HWWLQJV
6HUYLFH
)URVW3URWHFWLRQ
(OHFWULF
KHDWHU
1R
KHDWHU
)DVWFRQQHFWRUV6/,0
1RȌOWHULWKDV
EHHQUHPRYHG
Connect the fast connectors from the eletrical preheater with the fast connectors of the SLIM unit. Fast connectors in
the SLIM unit are protected with taps that have to be unscrewed first.
The two type of connectors are different so it is not possible to connect them incorrectly.
0HQX
6HUYLFH
6HWWLQJV
6HUYLFH
&23 &$9 9$9
9HQWLODWLRQPRGH
6HWWLQJV
6HUYLFH
)URVW3URWHFWLRQ
(OHFWULF
KHDWHU
1R
KHDWHU
)DVWFRQQHFWRUV
6/,0
&RQQHFWLRQGRQH
Reminder: Put the filter back inside the unit.