S&P SLIM Series, Manual, Page: 41 / 72

41
19. INSTALLER LEVEL
In this level is possible to adjust the operating parameters of the unit. In order to access the installer (service) level, look
for the login menu and enter the password: 1 1 1 1:
S&P
21.0°C
1500 m3/h
1500 m3/h
User
12:32
28-09-21
Run mode : On
Control mode : Supply Air Control
Menu Menu
User
User Login
User
Service
Admin
Password: 1 1 1 1
Screen display settings
(brightness, backlight, etc. and language)
Menu
Service
S&P
21.0°C
1500 m3/h
1500 m3/h
Service
12:32
28-09-21
Run mode : On
Control mode : Supply Air Control
Display Settings
Service
Brightness level
100 %
Time until standby
1 min
Logout time
5 min
Select language
English
Version: XX-XX-XX
Time settings
(change date)
Menu
Service
Timer Menu
Service
Date / Time Time Schedule
Date / Time
Service
Date
Day of week
Time
Automatic switch between
summer and winter
17 / 09 / 2021
Monday
09:16
Synoptic installation
Useful menu to check the general view of the heat recovery system.
Temperature settings
Within the heat recovery unit, four temperature sensors are supplied (installed from factory): Extract, Supply after ex-
changer, Exhaust and Outdoor.
If a post treatment module is installed, the temperature of the air stream after the external module is shown on the
“supply” line. (for more details, see section "14.4. External components connection drawings (examples)").
By touching the “set point” line, installer will be able to set the temperature set point as desired.