S&P SLIM Series, Manual, Page: 57 / 72

57
Once the cap-screws are inside the closing system, (inside the external module), let the external module “fall” so that
it will be resting in the desired possition:
4. Tight the closing system to fit the external module and ensure the tightness of the complete assemble by means of
the lateral- nut:
As a result, we get a 3 mm distance between the main unit and the module. Taking into account that there will be a rub-
ber seal bettween the unit and the external module, we can conclude that tightness is properly ensured.
29.2. CONFIGURATION OF EXTERNAL MODULES OF REFRIGERATION/HEATING BATTERIES
Once the corresponding wiring has been done (see section "14.4. External components connection drawings (exam-
ples)"), it will be necessary to reconfigure the SLIM controller from the SETTINGS menu.
It is possible to configure up to 2 different external modules in a row: “Heating/Cooling 1” & “Heating/Cooling 2”. Coil
module reconfiguration is included at
Settings menu.
Note
DX coil: Cooling only
Reversible DX coil: Cooling & Heating