59
30.1. INSTALLATION OF AN ELECTRICAL PREHEATER
Not necessary in case of SLIM-PH with preheater factory mounted.
SLIM electrical preheaters have been designed to be installed on site, integrated inside the heat recovery unit. Find the
procedure to install the electrical preheater below (example for SLIM-R):
a) Open the two sliding doors marked in the following
image.
b) Move the panels. Fan and condensate tray will be
visible.
Outdoor duct
connections
Indoor duct
connections
)DQ&RQGHQVDWHWUD\
c) Turn the condensate tray over itself.
d) Remove the specific panel for electrical preheater location
2XWGRRUGXFW
FRQQHFWLRQV
,QGRRUGXFW
FRQQHFWLRQV
6/,05%R
Ʃ
RPYLHZ
5HPRYHWKLVSDQHO
e) Place the electrical preheater inside the unit.
IMPORTANT
Please note that the electrical preheater is supplied within 2
fast-connectors. Place the electrical preheater in a way that these
fast-connectors are facing the electrical cabinet of the slim unit.
)DVW
FRQQHFWRUV
(OHFWULFDO
FDELQHW
Summary of Contents for SLIM Series
Page 1: ...SLIM EN...
Page 2: ......
