S&P SLIM Series, Manual, Page: 50 / 72

50
24. TIME PROGRAMMING
The controller has several clocks which allow the individual programming of: Normal Speed, Reduced Speed, Extra
Speed and Stop.
• Normal speed corresponds to normal pressure in COP mode and normal flow in CAV mode.
• Reduced speed corresponds to reduced pressure in COP mode and reduced flow in CAV mode.
• Extra speed corresponds to extra flow in CAV and VAV.
The programmer works for intervals (outside these intervals the fans are stopped). The installer can define up to 4 ope-
ration intervals per day in each speed. Find the procedure to set the time schedule below.
Particularities of the mode VAV Auto
When VAV Auto mode is selected and a time program is set in "Normal speed" or "Reduced speed" , the unit will manage
the fans speed according to the 0-10V input from an external sensor. If the time program is set in Extra speed the fans
will run at maximum speed.
24.1. CONFIGURE A TIME PROGRAM
Configuring the Normal Speed time program:
Same procedure as for configuring the Reduced Speed & Extra Speed time programs.