Installation
on
S&C Mounting Pedestals
Installing the Conduit Assembly
Step 39
Set the conduit assembly in the hooks at
the top of the pedestals. The conduit should
be attached to the cross-base opposite the
control cabinet. Make sure the conduit
is placed along the pedestal to which the
control cabinet is attached. Position the conduit
ends near the electrical junction boxes of the
pole-units. See Figure 39.
Figure 39. Set the conduit assembly in the hooks at the top of the
pedestals.
Conduit assembly
Pedestal hooks
Figure 41. Using the offset mounting brackets, attach the conduit
assembly to the pedestal.
Offset mounting bracket
Conduit assembly
Pedestal
Step 41
Using the offset mounting brackets, attach the
conduit assembly to the pedestal. See Figure 41.
Figure 40. Using the offset mounting brackets, attach the conduit
assembly to the cross base.
Conduit assembly
Cross base
Offset mounting bracket
Step 40
Using the offset mounting brackets, attach
the conduit assembly to the cross base. Bolt
the brackets through the predrilled holes. See
Figure 40.
S&C Instruction Sheet 731-502
23
