Manual Charging Tool Assembly
Step 69
Push the insulating shaft and the tool handle
together. Align the holes on the insulating shaft
and the tool handle, then push the linchpin
through the holes. See Figures 77 and 78.
Extra Sections for the Charging Tool
Extra sections can be assembled in accordance
with the instructions above. It is recommended
that a maximum of two 48-inch sections be
added to the tool.
Figure 77. Push the handle and the insulating shaft together.
Linchpin
Tool handle
Insulating shaft
Figure 78. Align the holes on the handle and the insulating shaft, then
insert the linchpin.
Linchpin
Insulating shaft
Handle
S&C Instruction Sheet 731-502
39
