Installation on S&C Mounting Pedestals
Step 46
Attach the conduits for pole-unit wiring and
control-circuit wiring to the punched holes on
the cabinet bottom, then pull the wires through
to the connection enclosure. Be sure that the
fittings are properly sealed to prevent water
ingress. See Figure 48.
Step 47
Connect the pole-unit wiring and user-furnished
control-circuit wiring to the appropriate termi-
nation blocks in the control cabinet, in accor-
dance with the wiring diagram furnished.
See
Figure 49.
Figure 48. Attach the conduit for pole-unit wiring to the punched holes
on the enclosure bottom.
Conduit
Figure 49. Connect pole-unit wiring to terminal blocks in the control
cabinet, in accordance with the wiring diagram furnished.
Terminal blocks
for pole-unit
wiring
26
S&C Instruction Sheet 731-502
