S&C Instruction Sheet 661-500 25
Appendix A
Complete the following steps to manually set the date:
STEP 1.
Push and hold the DOWN pushbutton until the
RTC DAT
mode is displayed on the LCD screen.
When the mode appears, immediately release
the pushbutton.
STEP 2.
When the pushbutton is released, the
RTC DAT
mode
is active and the configured date will be
displayed. The date is in the MM.DD.YYYY
format. The month digits will be flashing,
showing the month is ready to be configured.
Push the
UP
button once to increment the digit
by 1, if necessary.
NOTICE
The UP button increases the value of the digit
by 1 . At the maximum value (12 for month),
the next push rolls over to the minimum
value (1 for month) . Certain digit positions
within the configurable value do not follow
the 0-through-9 concept; they instead have
their own configurable values .
STEP 3.
To select the subsequent day or year positions,
push (or repeatedly push) the DOWN
pushbutton to move the flashing position to
the desired position. When the month, day, or
year position is selected, repeatedly push the
UP pushbutton to select the desired number.
STEP 4.
When the date is correctly entered, repeatedly
push the DOWN pushbutton until the screen
displays “SAVE.”
STEP 5.
To save the date entered, push the UP push-
button to store the desired value.