Ç
DANGER
“DANGER” identifies the most serious and immediate hazards which
will
likely
result in serious personal injury or death if instructions, including recommended
precautions, are not followed.
Ç
WARNING
“WARNING” identifies hazards or unsafe practices which
can
result in serious
personal injury or death if instructions, including recommended precautions, are
not followed.
Ç
CAUTION
“CAUTION” identifies hazards or unsafe practices which
can
result in minor
personal injury or product or property damage if instructions, including recom-
mended precautions, are not followed.
NOTICE
“NOTICE”
identifies important procedures or requirements that, if not followed,
can
result in product or property damage if instructions are not followed.
Following Safety
Instruction
If you do not understand any portion of this instruction sheet and need assistance, con-
tact your nearest S&C Sales Office or S&C Authorized Distributor. Their telephone
numbers are listed on S&C’s website
www.sandc.com
. Or call S&C Headquarters at
(773) 338-1000; in Canada, call S&C Electric Canada Ltd. at (416) 249-9171.
NOTICE
Thoroughly and carefully read this instruction
sheet before operating your Micro-AT Source-
Transfer Control.
Replacement
Instructions and
Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment
be replaced immediately. Replacement labels are available by contacting your
near
est S&C Sales Office, S&C Authorized Distributor, S&C Headquarters, or
S&C Electric Canada Ltd.
S&C Instruction Sheet 515-506
5
Safety Information
