22 S&C Instruction Sheet 766-557
NOTICE
Always turn off the docking station power switch
before disconnecting the modules .
The docking station includes an inrush current limiter . It requires about 2 minutes to
reset after the power switch is turned off . . . power
cannot be turned on during that time .
Step 1
Turn off the docking station power switch.
Step 2
Carefully disconnect the protection and control module and the communication module
from the docking station.
Step 3
If applicable, disconnect the directly connected computer and/or DNP test set.
Step 4
Disconnect the power cord from the docking station. Then unplug the power cord from
the ac outlet.
Shutting Down
Summary of Contents for IntelliRupter PulseCloser SDA-4650R2
Page 24: ......
