10 S&C Instruction Sheet 766-557
If you have programmed new settings in the protection and control module and wish
to use them when the module is installed in the IntelliRupter fault interrupter base, select
Setup > General, Tab: IntelliRupter
. See Figure 6.
Select
“On Next Power-up, Use Settings From Control.”
Remember to select
Setup > Validate/Apply
and click the
Apply
button before shut-
ting down.
Figure 6. Setup—General—Validate/Apply screen.
Establishing Wi-Fi Connection
Summary of Contents for IntelliRupter PulseCloser SDA-4650R2
Page 24: ......
