12 S&C Instruction Sheet 766-557
Serial Connection—Rev. 3.4.x and Earlier
Step 1
IntelliLink Setup Software is installed by default in the
C:\Program Files\
S&C Electric\IntelliLink
folder. Double click the application
ilink.exe
to launch the
IntelliLink software. The location of this file is shown in Figure 8.
Connect with
IntelliLink® Setup
Software
Figure 8. Location of the IntelliLink Setup Software application file.
Step 2
When the IntelliLink software is launched, it is configured by default to connect to the
control over a wireless link. It automatically attempts to establish this connection. Wait
for the connection attempt to time-out. Messages in the
Connect
dialog window should
be approximately the same as Figure 9.
Figure 9. IntelliLink Connect dialog window.
NOTICE
The following procedure is used with IntelliRupter Installer versions 3 .4 .x and earlier . For
newer installer revisions see the next section, that starts on page 17 .
Summary of Contents for IntelliRupter PulseCloser SDA-4650R2
Page 24: ......