20 S&C Instruction Sheet 766-557
Serial Connection—Rev. 3.5.x and Later
Step 3
The
Firmware Update
dialog box opens. See Figure 22.
Figure 22. Firmware Update dialog box.
Step 4
If any of the software components installed in the control have the same or higher version
number as the versions being downloaded a message similar to that shown in Figure 23
will appear. It is recommended that you select the
Yes
button unless instructed otherwise
by an S&C representative.
Figure 23. Confirmation dialog box.
Step 5
After the software components have been installed the control will automatically be
restarted and the
Enter your credentials
dialog will open. See Figure 24.
Figure 24. Enter your credentials dialog box.
Step 6
Enter your
User Name
and
Password
or the factory default
User Name:
admin
and
Password:
1135Atlantic
if you have not changed them.
After the process has completed click the
Close
button to proceed.
Summary of Contents for IntelliRupter PulseCloser SDA-4650R2
Page 24: ......
