S&C Instruction Sheet 1041-540 33
Overcurrent Fault Protection
Figure 9. The
DATA LOGGING: Data for Most Recent Week Menu
screen (5801 control is
shown)
At the
DATA LOGGING: Data for Most Recent Week Menu
screen, users can select the
set of daily profile data to view, data for Sunday, data for Monday, etc. See Figure 9. This
data consists of 15-minute averaged (5801 control) or 30-minute averaged (5802/5803
controls) values for voltage, current, and kvar for each of the most recent seven days.
Note:
For the 5802/5803 controls, there are separate menus for Switch 1, Switch 2, and
Switch 3. The screens for Switch 3 contain only RMS current values for each of the most
recent seven days.
To display the
DATA LOGGING: Data for Most Recent Week Menu
screen, click the
Most Recent Week
button for the desired switch, if applicable, at the
DATA LOGGING
MENU
screen.
Data Logging for Most
Recent Week
Each
DATA LOGGING: Profile Data
screen shows the data for one day (12 midnight to
12 midnight) during the preceding week. See Figure 10 on page 34.
Note:
If selecting to view information for today, values from two separate days can be
seen. For example, if it is 3:01 p.m. on a Tuesday and
Profile Data for Tuesday
option
is selected, all the data entries through 3:00 p.m. are the day’s values. All the entries for
times after 3:00 p.m. are from the same day the previous week.
To display a
DATA LOGGING: Profile Data
screen, click on the button for the day
to be viewed at the
DATA LOGGING: Data for Most Recent Week
screen for the desired
switch, if applicable.
Profile Data for One
Day
