84
5.4.4 Sync-Mode
1) AUTO / +00
This function is to synchronize the black bar (synchronizing line) on weather fax screen.
AUTO: The bar automatically lines up in vertical.
+00: To adjust the incline of the black bar.
If the value is increased to positive direction, the bar will be inclined from right to the left. If the
value is increased to negative direction, the bar will be inclined from right to the left. In case of
『
+00
』
, the bar will be drawn to straight line.
Go to [Sync-Mode] and press
(
) to select
『
AUT0/+00
』
.
If select
『
+00
』
, it is able to increase or decrease the value of +00 by (
/
).
2)
■
While receiving a weather data, the synchronization signal is not detected due to noise. In this
case, it is the function that the black bar put in the end of right and left on the screen.
Go to [Sync-Mode] and press
(
) to select
『
+00
』
.
Put a cursor on wishing place as below and then set a black bar.
『
』
: The black bar will move to the right whenever press
(
).
『
■
』
: The black bar will be placed on the right and left as normal position
whenever press
(
).
『
』
: The black bar will move to the left whenever press
(
).
【
【
【
【
NOTE
】
】
】
】
☞
Move a cursor on
『
■
』
and press
(
)
This makes the synchronization will be established with one or two trials.
Summary of Contents for Navis 3800
Page 6: ...7 This chapter provides an overview of the GLOBAL POSITIONING SYSTEM GPS 1 1 1 1 GPS PLOTTER...
Page 16: ...17 3 Power ON OFF Power ON Press Power OFF Press and hold approximately 2 sec...
Page 19: ...20 GPS Plotter Display C MAP Plotter Display 31...
Page 23: ...24 Fish finder Combo Display Fish finder Display...
