48
After select 'FROM' number of the left and then, press
(
) button.
'0000' number shows an own-ship’s position and '001~999' is belongs to the registered
waypoints.
After select 'TO' number of the right and then, press
(
) button.
The red line is shown from a start point of Waypoint to an arrival point of Waypoint and the
Lat/Lon, distance, direction, estimated time, approach speed and navigation time of the arrival
point of the waypoint are shown in a bottom-left of the plotter screen.
How to choose ‘Waypoint Navigation’ shortcut by using (
) button menu
In the current position, if you want to go to the saved waypoint, on the plotter screen,
press
select Waypoint with direction key and press (
)button
From Current
position to Waypoint, red line is shown and LAT/LOT, distance, direction, speed, time to
the destination of waypoint are shown on the left bottom of the plotter screen. (1.4.2
waypoint edit, 1.4.1 waypoint mark set up should be done first)
[ Ref. ]
☞
☞
☞
☞
Select 'Waypoint Navigation' used by
(
) button .
Press
(
) button in Plotter screen, Select [6.WAYPOINT] and select or Edit
Waypoint which is supposed to sail.
You can edit Waypoint number, Position, Mark, Name easily.
Summary of Contents for Navis 3800
Page 6: ...7 This chapter provides an overview of the GLOBAL POSITIONING SYSTEM GPS 1 1 1 1 GPS PLOTTER...
Page 16: ...17 3 Power ON OFF Power ON Press Power OFF Press and hold approximately 2 sec...
Page 19: ...20 GPS Plotter Display C MAP Plotter Display 31...
Page 23: ...24 Fish finder Combo Display Fish finder Display...